Need Advice: Wire Supports For frost cover/netting tunnels
- GoDawgs
- Reactions:
- Posts: 3741
- Joined: Thu Dec 12, 2019 6:38 am
- Location: Zone 8a, Augusta GA
Need Advice: Wire Supports For frost cover/netting tunnels
I currently use 1/2" irrigation pipe to support frost cloth and netting over my 4' wide raised beds but I want something that will be useful to run down all or just part of a row on one side of a bed. I see some wire hoops (with accompanying covering) being sold for this purpose in some seed catalogs but I can most likely buy the wire around here for less money and cut it myself with my bolt cutter.
Do any of you use these? If so, what gauge wire is it? I realize the length of wire needed for a hoop will vary according to height of hoop, how far in the ground the ends are pushed and how wide it spreads, but does anyone have a general rule of thumb? I just want to buy a bit for testing purposes so I can cover a few things without setting up the whole bed with my current set-up.
Thanks in advance for any input!
Do any of you use these? If so, what gauge wire is it? I realize the length of wire needed for a hoop will vary according to height of hoop, how far in the ground the ends are pushed and how wide it spreads, but does anyone have a general rule of thumb? I just want to buy a bit for testing purposes so I can cover a few things without setting up the whole bed with my current set-up.
Thanks in advance for any input!