Handy Dandy Window Boxes

Free for all about gardening techniques, tips and questions.
Post Reply
User avatar
GoDawgs
Reactions:
Posts: 4745
Joined: Thu Dec 12, 2019 6:38 am
Location: Zone 8a, Augusta GA

Handy Dandy Window Boxes

#1

Post: # 65769Unread post GoDawgs
Sat Mar 19, 2022 5:11 pm

I use inexpensive plastic window boxes as planters for herbs or stuff like starting sweet potato slips. The ones here are old now and getting brittle from sun exposure. Time to get more at the dollar stores. The old ones came from Dollar General many moons ago but they had none today. Family Dollar did. They were $3 each so I got three.

They are 24x7.75" at the top, 6.5" deep.

Image

The sides taper down so the bottom is 20x4". It also has locations on the bottom to drill drainage holes.

Image

The old ones cost a little more but had removable solid bottoms that you could snap on or off. These don't so they'll be solely for outdoor use unless I find trays big enough to sit them on.

If you're interested in getting any of these, you need to get them soon. The dollar stores only buy x amount of gardening stuff for spring and when the supply is gone, it's gone until next year.

User avatar
pepperhead212
Reactions:
Posts: 3917
Joined: Mon Jan 20, 2020 12:07 am
Location: Woodbury, NJ

Re: Handy Dandy Window Boxes

#2

Post: # 65867Unread post pepperhead212
Sun Mar 20, 2022 6:27 pm

I used to use those windowsill boxes around my deck every year, with 4 racks I had built to hold them on the rail of the deck - one 36" one, and three 28" ones. They did great, growing herbs and leaf lettuce every year. I'd put 3 drip emitters on the small ones, and 4 on the large one, for simple watering. Several years ago, when all those started breaking up, as you describe, I switched over to Jr Earthboxes, which also work great. I had to build new racks, but all the same, so it wasn't difficult. I bring them into my back porch, on a cheap shelf, and just a couple of days ago, I started taking them back out again.
Woodbury, NJ zone 7a/7b

Post Reply

Return to “General Discussion”